Linux version 2.4.17-acpi (luc@elite1) (gcc version 2.95.4 20011002 (Debian prerelease)) #23 jeu fév 28 21:12:27 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003fe0000 (usable) BIOS-e820: 0000000003fe0000 - 0000000003ff0000 (ACPI data) BIOS-e820: 0000000003ff0000 - 0000000004000000 (reserved) BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved) BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS) BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) On node 0 totalpages: 16352 zone(0): 4096 pages. zone(1): 12256 pages. zone(2): 0 pages. ACPI: RSDP (v000 TOSHIB ) @ 0x000f0170 ACPI: RSDT (v001 TOSHIB 750 00151.02068) @ 0x03fe0000 ACPI: FADT (v001 TOSHIB 750 00151.02068) @ 0x03fe0054 Kernel command line: root=/dev/hda6 vga=5 NETWORK=dhcp console=ttyS0,115200 console=tty0 Initializing CPU#0 Detected 430.448 MHz processor. Console: colour VGA+ 80x34 Calibrating delay loop... 858.52 BogoMIPS Memory: 61936k/65408k available (1209k kernel code, 3084k reserved, 397k data, 212k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Mendocino) stepping 0a Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Bus Driver revision 20020214 ACPI: Core Subsystem revision 20020214 PCI: BIOS32 Service Directory structure at 0xc00f0200 PCI: BIOS32 Service Directory entry at 0xfc40b PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=15 PCI: PCI BIOS revision 2.10 entry at 0xff85c, last bus=21 PCI: Using configuration type 1 tbxface-0099 [17] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:................................................................................................................................................................................. 177 Control Methods found and parsed (516 nodes total) ACPI Namespace successfully loaded at root c02d88b8 evxfevnt-0080 [47] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:............................................. 45 Devices found: 45 _STA, 1 _INI Completing Region and Field initialization:.... 4/7 Regions, 0/0 Fields initialized (516 nodes total) ACPI: Interpreter enabled ACPI: System [root] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [\_SB_.LNKA] ACPI: PCI Interrupt Link [\_SB_.LNKB] ACPI: PCI Interrupt Link [\_SB_.LNKC] ACPI: PCI Interrupt Link [\_SB_.LNKD] ACPI: PCI Interrupt Link [\_SB_.LNKE] ACPI: PCI Root Bridge [PCI0] (00:00) PCI: IDE base address fixup for 00:05.1 PCI: Scanning for ghost devices on bus 0 PCI: Scanning for ghost devices on bus 1 Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 00:00:0B[A] -> \_SB_.LNKA[0] 00:00:0B[B] -> \_SB_.LNKB[0] 00:00:07[A] -> \_SB_.LNKE[0] 00:00:0D[A] -> \_SB_.LNKD[0] 00:00:0C[A] -> \_SB_.LNKB[0] 00:00:05[D] -> \_SB_.LNKD[0] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] 00:00:00[A] -> \_SB_.LNKA[0] ACPI: Power Resource [PIHD] (on) ACPI: Power Resource [PMHD] (on) ACPI: Power Resource [PFAN] (off) PCI: Probing PCI hardware PCI: IRQ init PCI: Using ACPI for IRQ routing PCI: IRQ fixup PCI: Allocating resources PCI: Resource f8000000-fbffffff (f=1208, d=0, p=0) PCI: Resource 0000fff0-0000ffff (f=101, d=0, p=0) PCI: Resource 0000ff80-0000ff9f (f=101, d=0, p=0) PCI: Resource ffefff00-ffefffff (f=200, d=0, p=0) PCI: Resource 000002f8-000002ff (f=109, d=0, p=0) PCI: Resource 00001c00-00001cff (f=101, d=0, p=0) PCI: Resource 0000fc00-0000fcff (f=101, d=0, p=0) PCI: Resource ff400000-ff7fffff (f=200, d=0, p=0) PCI: Resource ff3e0000-ff3fffff (f=200, d=0, p=0) PCI: Resource fec00000-feffffff (f=200, d=0, p=0) PCI: Sorting device list... Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button [PWRF] ACPI: Lid Switch [LID] ACPI: Fan [FAN] (off) ACPI: Thermal Zone [THRM] (38 C) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 29 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DBCA-206480, ATA DISK drive hdc: CD-224E-B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 11733120 sectors (6007 MB) w/420KiB Cache, CHS=730/255/63, UDMA(33) hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hda3 hda3: Floppy drive(s): fd0 is 1.44M FDC 0 is an 8272A loop: loaded (max 8 devices) Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 00:0b.0 (0000 -> 0002) IRQ for 00:0b.0:0 (11) -> mask 1ce0 (11) -> newirq=11 -> got IRQ 11 PCI: Found IRQ 11 for device 00:0b.0 PCI: Enabling device 00:0b.1 (0000 -> 0002) IRQ for 00:0b.1:1 (11) -> mask 1ce0 (11) -> newirq=11 -> got IRQ 11 PCI: Found IRQ 11 for device 00:0b.1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 04b0, PCI irq11 Socket status: 30000011